Toyota Yaris: When Driving / Transaxle
The light illuminates continuously
when the engine coolant temperature is low and turns off after the
engine is warm.
If the low engine coolant temperature indicator light remains illuminated
after the engine has been
sufficiently warmed up, the temperature sensor could have a malfunction...
Other information:
FREEZE FRAME DATA FREEZE FRAME DATA NOTICE:
It is difficult to show the specified values (judgment values) clearly because freeze frame data values change significantly due to differences in measurement conditions, surroundings, or vehicle conditions...
INSTALLATION PROCEDURE 1. INSTALL TRANSFER AND TRANSAXLE SETTING STUD BOLT (a) Clean the bolt holes. (b) Apply adhesive 1324 to 2 or 3 threads on one half of a new transfer and transaxle setting stud bolt A as shown in the illustration.
*a Toyota Genuine Adhesive 1324 *b Sealant Adhesive: Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent NOTICE:
Do not apply adhesive 1324 to the ends of the transfer and transaxle setting stud bolt A...
Categories
Stop the vehicle completely.
Manual transaxle:
Shift into neutral and set the parking brake.
Automatic transaxle:
Shift the selector lever to the P position and set the parking brake.
Press the push button start to turn off the engine. The ignition position is
off.
read more