Toyota Yaris: Door Lock / Front Door Lock

Door Control Transmitter

ComponentsCOMPONENTS ILLUSTRATION *1 MECHANICAL KEY *2 TRANSMITTER BATTERY *3 TRANSMITTER HOUSING CASE *4 TRANSMITTER HOUSING COVER InspectionINSPECTION PROCEDURE 1...

Components

COMPONENTS ILLUSTRATION *A for Driver Side *B for Front Passenger Side *1 FRONT DOOR LOWER FRAME BRACKET GARNISH *2 MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT ARMREST BASE UPPER PANEL *3 POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT ARMREST BASE UPPER PANEL *4 FRONT DOOR TRIM GARNISH *5 FRONT DOOR TRIM BOARD SUB-ASSEMBLY *6 FRONT DOOR GLASS INNER WEATHERSTRIP ILLUSTRATION *A for Driver Side - - *1 FRONT DOOR SERVICE HOLE COVER *2 FRONT DOOR OUTSIDE HANDLE ASSEMBLY *3 FRONT DOOR LOCK CYLINDER ASSEMBLY *4 FRONT DOOR WITH MOTOR LOCK ASSEMBLY *5 FRONT DOOR LOCK OPEN LEVER REMOTE CONTROL CABLE *6 FRONT DOOR LOCK/UNLOCK KNOB INSIDE LOCKING CABLE *7 DOOR LOCK WIRING HARNESS SEAL *8 FRONT DOOR SERVICE HOLE COVER CLIP *9 HOLE PLUG - - N*m (kgf*cm, ft...

Other information:

Toyota Yaris XP210 (2020-2024) Reapir and Service Manual: Starter Signal Circuit

DESCRIPTION While the engine is being cranked, current flows from terminal STAR of the certification ECU (smart key ECU assembly) to the clutch start switch assembly and to terminal STA of the ECM (STA signal). WIRING DIAGRAM Refer to DTC P061512. Click here CAUTION / NOTICE / HINT NOTICE: Inspect the fuses for circuits related to this system before performing the following procedure...

Toyota Yaris XP210 (2020-2024) Reapir and Service Manual: 4wd Control Switch

ComponentsCOMPONENTS ILLUSTRATION *1 CONSOLE BOX ASSEMBLY *2 4WD CONTROL SWITCH (NO. 2 COMBINATION SWITCH ASSEMBLY) RemovalREMOVAL PROCEDURE 1. REMOVE CONSOLE BOX ASSEMBLY Click here 2. REMOVE 4WD CONTROL SWITCH (NO. 2 COMBINATION SWITCH ASSEMBLY) (a) Remove the 3 screws and 4WD control switch (No...